1 – Top

High resistance melamine top, 22 mm thick, with a density of +/-3% of 770 kg/m3. Smooth or slightly textured melamine decor sheet, depending on the choice of finishes. Counterbalance in melamine with the same finish.

2 – Structure

Structure composed of one metal crosspiece per shelf, covered with epoxy powder paint, with inserts to ensure a quality and durable fixing of the shelf. The wooden leg is fixed to the metal structure by inserting and screwing it into the side lintels to provide maximum rigidity to the table.

3 – Legs

Sloping A-shaped or straight U-shaped base, mixed metal and solid oak. Square section of 50x50mm at the base of the leg and 35x35mm at the tip.

4 – Jacks

Adjusting cylinders in PVC, 20 mm in diameter. Adjustment stroke of 13 mm.

5 – Edges

2 mm thick ABS edges as standard, finished like a tray.

TRAY

Sliding Tray

Bench A metal plate with a slot allowing the sliding of the tray and easy access to the feeder for installation and maintenance. For safety reasons, the sliding mechanism can be blocked by a knob.

Cut-out Desk

Cut-out in the top of the bench to allow cables to pass through.

A metal strip

In the middle of the bench can be used to add a panel at a later stage.

STORAGE MODULE

The range is based on storage modules of different sizes that can be combined with this frame. They are available in many variations: sliding doors, hinged doors, drawers, CPU storage, niches, benches, etc. Wooden legs and metal crosspieces form the base of the storage units. The storage units are finished in melamine with 18mm thick panels everywhere except the 22mm top.